What to Send for an Embroidery or Screen Printing Quote | East Coast Embroidery
Get a Quote

What to Send for an Embroidery or Screen Printing Quote

The more detail you include up front, the faster and more accurate your quote will be. Here is exactly what we need to give you a real number, not a range.

Short answer: Send us your logo file (vector preferred), the quantity, the garment type or style number, where you want the logo placed, how many decoration colors, and your deadline. That is everything we need for an accurate quote, usually returned within one business day.

The Quote Request Checklist

Include as many of these as you can. The more you send up front, the fewer back and forth emails before you have a number.

Required

Logo / Artwork File

Your company logo in the highest quality format available. Vector (AI, EPS, SVG, PDF) is ideal. High resolution PNG or JPG (300 DPI+) works too.

Avoid: screenshots, low resolution web images, logos embedded in Word documents or PowerPoint slides.
Required

Quantity

How many total pieces you need. If ordering multiple sizes, include the size breakdown (e.g. 4 small, 8 medium, 6 large, 4 XL).

Remember minimums: 6 for embroidery, 24 for screen printing or heat transfer, 60 for laser etching.
Required

Garment Type

The specific style number if you know it, or describe what you need: polos, t-shirts, jackets, hats, workwear. Include the intended use so we can recommend the right fabric and weight.

Helpful

Logo Placement and Size

Where the logo goes on the garment: left chest, full back, right sleeve, hat front. Approximate size if you have a preference (e.g. "about 4 inches wide").

Helpful

Decoration Colors

Number of thread colors (embroidery) or ink colors (screen printing) in your design. Pantone numbers if you have them, otherwise we match from your logo file.

Helpful

Deadline

When you need the finished order in hand. This helps us plan production and flag if a rush fee applies or if we need to suggest faster alternatives.

Logo Files and Artwork

The quality of your logo file directly affects the quality of the finished product, especially for embroidery. A clean vector file digitizes faster, stitches sharper, and often costs less because the digitizer spends less time cleaning up the art.

Best Formats (in order of preference)

What to Avoid

Low resolution images pulled from websites (usually 72 DPI), logos embedded inside Word documents or PowerPoint slides, screenshots, or photos of business cards. These create extra digitizing work, can delay your quote, and may produce a result that does not match your original branding.

If a vector file is not available, the highest resolution version you have is always better than nothing. We will let you know during the quote process if the file quality is a concern for your specific project.

New logos: Every new embroidery logo requires a one time $50 digitizing fee to convert the artwork into a stitch file. We stitch a physical sample of every new logo and send you a photo for approval before running the full order. Once digitized, the file stays on record permanently and every future reorder skips that fee.

Quantities and Minimums

Minimum order quantities exist because each decoration method requires setup (digitizing, screen burning, transfer preparation) that has to be spread across enough pieces to be practical.

Decoration Method Minimum Order Why
Embroidery 6 pieces Digitizing setup and machine threading. Reorders of an existing design also require 6 pieces minimum.
Screen Printing 24 pieces Each ink color requires a separate screen. Setup cost is spread across the run.
Heat Transfer / DTF 24 pieces Transfer preparation and press calibration per garment type.
Laser Etching 60 pieces Specialized equipment setup for fleece and performance fabrics.

If your quantity falls below a minimum, let us know anyway. We can often suggest a different decoration method that fits your count, or combine your order with another project to meet the threshold.

Garment Selection

You do not need to know the exact style number to get a quote. If you tell us the type of garment, the intended use, and any brand preferences, we will recommend specific options. That said, the more specific you are, the more accurate the first quote will be.

What Helps Us Recommend the Right Garment

Browse garments and request quotes directly at shop.eastcoastembroidery.com, or describe what you need and we will send options.

Placement, Size, and Colors

Each logo placement (left chest, full back, right sleeve, hat front) is quoted separately because it is a separate setup and production step.

Common Placement Options

Colors and Color Matching

The number of colors in your design affects pricing, especially for screen printing where each color requires a separate screen. For embroidery, thread color count has a smaller impact on cost but still matters for digitizing accuracy.

If you have Pantone (PMS) color numbers, include them. If not, we will match as closely as possible from your logo file. We use name brand thread and ink and can match virtually any color. The proof approval step exists specifically to confirm color accuracy before production begins.

Deadlines and Turnaround

Always include your deadline in the quote request. Even if it seems far away, knowing the date lets us schedule production efficiently and flag potential conflicts before they become problems.

Standard turnaround: About 10 business days after proof approval for most orders. New customers, allow up to 3 weeks, which includes digitizing, a stitched sample, and approval steps.

"After proof approval" is the key phrase. The clock does not start when you submit a quote request. It starts when you approve the digital proof (and the stitched sample for new embroidery logos). Delays in approval delay the finished order by the same number of days.

If you have a hard deadline (a trade show, a company launch, a seasonal start date), tell us in the quote request. Rush production may be available depending on current workload, and we would rather tell you up front if a date is tight than discover it after the order is placed.

Choosing a Decoration Method

Not sure whether your project needs embroidery, screen printing, heat transfer, or laser etching? Here is a simplified comparison. For the full breakdown, see our decoration method comparison guide.

Method Best For Minimum Color Considerations
Embroidery Polos, hats, jackets, workwear. Professional look that lasts years. 6 pieces Thread color count affects stitch file complexity. Most logos work well with 1 to 8 colors.
Screen Printing T-shirts, large back prints, event apparel, high volume runs. 24 pieces Each ink color = one screen. Fewer colors at higher quantity = lowest per piece cost.
Heat Transfer / DTF Full color logos, photos on apparel, small quantity runs, individual names/numbers. 24 pieces Full color capability. Cost per transfer, not per color.
Laser Etching Fleece, performance fabrics. Subtle tone-on-tone branding without thread or ink. 60 pieces Single tone (burns the fabric surface). No additional color options.

If you are unsure, just say so in your quote request. We will recommend the best method based on your garment, quantity, budget, and intended use. Many customers do not know the right method until we discuss the project, and that is completely normal.

How the Quote Process Works

Here is what happens after you submit your request, so you know exactly what to expect.

  1. You send us the details. Logo file, quantity, garment (or garment type), placement, and deadline. Use the online portal, call, or email.
  2. We review and respond. Within one business day, you receive a detailed quote with line item pricing, garment recommendations (if applicable), and a production timeline.
  3. You approve the quote. If everything looks right, give us the go ahead. If you need adjustments (different garment, different quantity, add a second logo placement), we revise the quote.
  4. We create a digital proof. A mockup showing your logo on the selected garment with placement, size, and colors. You review and approve, or request changes.
  5. For new embroidery logos: we stitch a sample. A physical sample is stitched on the actual fabric type and photographed for your approval. This is where color accuracy and design detail are confirmed.
  6. Production runs. Once you approve the proof (and sample, if applicable), the full order enters production. From this point, most orders ship about 10 business days after proof approval. New customers, allow up to 3 weeks.
  7. Pickup or delivery. Finished orders can be picked up at our shop in East Providence or shipped directly to your location.

How to Submit Your Quote Request

Three ways to reach us, all equally fast. Pick whichever is easiest for you.

Online Quote Portal
embquote.com
Upload your logo and project details. Fastest for complex orders with multiple logos or garments.
Call Us
401 434 9224
Talk through your project directly. Best for first time customers who want guidance on garments and decoration methods.
Visit Our Shop
375 Waterman Ave, East Providence, RI
Bring your logo on a USB drive, see fabric samples, and discuss your project in person.

Related Guides

Frequently Asked Questions

What file format should my logo be in for embroidery?
Vector files (AI, EPS, SVG, or vector PDF) are ideal because they scale cleanly and give digitizers the best source material. High resolution PNG or JPG at 300 DPI or higher also works. Avoid low resolution images, screenshots, or logos embedded in Word documents, as these often produce poor digitizing results.
What is the minimum order for embroidery and screen printing?
Minimums vary by decoration method: 6 pieces for embroidery, 24 pieces for screen printing or heat transfer, and 60 pieces for laser etching. These apply per design, per decoration method.
How long does it take to get a quote?
We typically respond within one business day. The more complete your request (logo file, quantity, garment preference, and deadline), the faster we can provide an accurate quote.
Is there a cost for digitizing a new embroidery logo?
Yes. There is a one time $50 digitizing fee to convert a new logo into a stitch file. Once digitized, the file stays on record permanently and every future reorder skips that fee. We stitch a physical sample of every new logo and send you a photo for approval before running the full order.
Can I get a quote without knowing exactly what garment I want?
Absolutely. Tell us the general type (polo, t-shirt, jacket, hat), the intended use (warehouse crew, front office, trade show), and your approximate budget. We will recommend specific options that fit your needs.
What is the typical turnaround time after I approve a proof?
Standard turnaround is about 10 business days after proof approval for most orders. New customers, allow up to 3 weeks, which includes digitizing setup and a stitched sample approval.
Do you do patches?
No. East Coast Embroidery specializes in direct embroidery, screen printing, heat transfer, and laser etching on garments and accessories. We do not produce patches.
How do I submit a quote request?
You can submit a quote request through our online portal at embquote.com, call us at 401 434 9224 during business hours, or email your logo and project details directly. Most customers use the online portal for the fastest response.

Ready to get your quote?

Send us your logo, quantity, and garment preference. We will have a detailed quote back to you within one business day.

Request a Quote
Get a Quick Quote